One
of the reason for the excellent profitability
of our construction machines is the high-quality
component parts used in building the machines.
Our experts have a through knowledge of the
loads of the indovidual components and can
thus dimension the parts in a diligent manner.
We want our customers to successfully work
with our machines on a long-term basis.
This is why a "MICO" is made of
a large number of high-quality components.
For us, high-quality means maximum wear resistance
and optimum functioning, combined with easy
mounting. therefore, the original spare parts
from MICO offer benifits that are well worth
in the daily working routine : from easy despatch,
high availability and long service life to
precise fit and easy mounting. |
|
|
| |
|
| |
|
|
|
| |
| Our
universal claw couplings are a rugged
one-piece rust proof construction with
convenient quarter turn connect / disconnect.
Design increases holding power and sealing
power with increase of air pressure. |
|
|
|
| |
| Coupling
Washer |
|
|
Claw
coupling with male thread |
| Made of oil
and temperature-resistant rubber. One packing
is required for each coupling |
|
|
Can
be mated with any size of claw coupling. Short
length and large bore. |
| Claw
coupling with hose nipple |
|
|
Claw
coupling with female thread |
| Uniform size
of claws permits mating of different sizes
of claw coupling. |
|
|
Capable
of being mated with any size of claw coupling.
Short length and large bore. |
|
| |
| |
HOSE
NIPPLE AND HOSE CLAMPS
|
| |
|
|
|
| Hose
Clamps |
| Made
of malleable cast iron and grip
the hose effictively. Shaped to
provide a good joint and tightened
by a standard hexagon screw and
nut. |
|
| Hose
Joining Nipples |
| Made
of steel with a maximum of bore
area. Available in sizes for hoses
1/4"
to 2 1/2
". Dimensions from 1"
and downwards have one locking
edge at end, larger dimensions
have two locking edges at each
end for use with double hose clamps. |
|
|
|
| |
| |
|
|
|
|
| We
offer high quality lubricators that
are designed to provide adequate lubrication
to compressed air tools while they are
in operation. It is intended for use
with all types of compressed air tools
used in the construction, mining and
manufacturing industries. |
|
| |
|
|
|
|
|
|
|
|
|
| |
Litres |
lmp.gal |
Kg |
Lb |
m3/min |
cfm |
|
| MC
030 |
1.3 |
0.29 |
3.0 |
6.6 |
1.5
- 8.0 |
53
-282 |
3/4"
- 1" |
|
|
